Setting up a Brick Paver Walkway or Interlocking Bricks

The usage of Bricks or Pavers to produce a sidewalk or outdoor patio complements a home in a way that is unmatched. In addition, setting up a Brick or Paver sidewalk does not always require a pro.

The key to setting up a Brick or Paver Walkway is to very first properly prepare the location where the bricks/pavers are to be set up. The area ought to be dug out at least a foot down, eliminating all topsoil and clay soil. In addition, string lines need to be strung on each side of the sidewalk. The string lines show the finished height of the walkway.
When the area has actually been dug down, 3/4" gravel stone need to be laid in and tamped down securely. The height in between the tamped down sand and the stringline should equate to the thickness of the brick or paver.

Now that you have a stable base, place a 1" pipeline or ledger board the length of the sidewalk on either side of the sidewalk. Using a flatedge, e.g. a 2"x4" board, slide it over the 2 lengths of the pipe/ledger board. In doing this you will produce a level area to lay the bricks/pavers.

Now put on the level sand/stone dust strips of plastic brick borders. Set up a work on both sides of the ready area. These strips will act as your sidewalk border and assistance to maintain the stability and shape of the walkway. You can get these plastic strip borders at many house improvement shops. The strips must be anchored down with 12" galvinized nails. You should sink these nails into the ground and through the strips every foot.

As soon as this is done, you can then start to lay the bricks/pavers. There are many patterns you can lay. I especially like the Herring Bone pattern. The key to laying the bricks/pavers is to guarantee that they interlock with each other. Constantly stagger adjacent rows of bricks by 1/2 of a brick to interlock them. This will once again assist maintain the stability of the sidewalk.

When building the walkway, inevitably bricks/pavers will need to be cut or divided. Unless you wish to purchase or lease an expensive wetsaw, I would suggest buying an easy brick/paver splitter. It is generally a chisel with a wide end that is the width of the bricks/pavers. To really cut/split the brick/paver, lay it in a bed of sand and place the chisel at a 75 degree angle over the spot where you want to break the brick. Utilizing a hammer strike the butt end of the sculpt strongly. You might require to do this a number of times. You may also wish to flip the brick/paver over and strike the opposite of the brick using the hammer and chisle. Within one or 2 strikes the brick/paver should break easily. If your pathway has curves you will need to buy/rent a wetsaw.

After installing the bricks, develop the outdoors refractory brick cutting machine edges with additional sand, and after that shovel in the topsoil and load down firmly.
Spread stone dust over the brand-new walkway and sweep into the cracks. This will complete the interlocking of the bricks and help to get rid of any weed growth.


In addition, installing a Brick or Paver sidewalk does not necessarily require a pro. The secret to installing a Brick or Paver Walkway is to very first correctly prepare the area where the bricks/pavers are to be set up. Now that you have a stable base, position a 1" pipe or ledger board the length of the sidewalk on either side of the walkway. These strips will act as your sidewalk border and help to preserve the stability and shape of the walkway. Undoubtedly bricks/pavers will require to be cut or split when developing the sidewalk.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments on “Setting up a Brick Paver Walkway or Interlocking Bricks”

Leave a Reply

Gravatar